Skip to content
- Slitting capacity: 4 OUT (slitting tool: 5 sets, and scoring tool: 2 sets and total is 8 scorings)
- Structure is double scoring devices and adds one slitting system.
- Slitting and scoring use precise linear bearing. (traditional using ball screw)
- Slitting and Scoring Accuracy: ±1.0 mm.
- Top single blade diameter 270 mm. (Tungsten carbide blade)
- Minimum slitting size: 135 mm.
- Slitting type using top slitting design. Each blade has independent grinding and oil fill system, which can set up blade grinding of production meter according to paper material.
- Diameter of upper scoring tool: 224 mm.
- Lower scoring tools can furnish four types scoring device, with male to male, 2 male to female, and male to flat.
- Minimum scoring size: one set scoring tool: 135 mm, two set scoring tool coordination: 0 mm. With scoring depth control system.
- Slitting and Scoring base movement control by independent motor that could finish size adjustment within 10 seconds.
- With automatic paper pressing and avoid paper bending device in the middle of scoring and slitting tool.
- Up to 999 order changes can be stored into memory.
- Can output any order according to actual demand.
- Machine can left to right movement 75 mm that adjust by motorized motor.
- With motorized web suction equipment.
- 7 -1/2 HP A.C motor + inverter for scoring tool, 10HP A.C. motor + inverter for slitting tool.
- Synchronization with Double Backer. Using two units ally with operation to order change without cut off corrugated board or stop machine.